The Tube Tweaker lets you fix small mistakes while tube bending, to get a perfect fitting tube. With a little leverage you can easily tweak tubes up to 5°, you can get more bend/rotation depending on the tube and bends. Comes with 3/8" concrete anchors, that are easy to remove when not in use. It's best put this in a spot that has at least 10' of room to work.
-Made from 1/4" HRPO
-Includes 3/8" Titen concrete anchors
-Maximum 2"x.188 wall DOM
-How to use - Start by isolating the bend that needs to be tweaked.
For adding and removing bend, hold vertical then push or pull. For
tweaking rotation, add wood blocks at start of second bend to space off
floor, then jump on tube. It's best to start 6-12" off ground and let
tube touch the ground, then check and add more distance/wood blocks as
required.
-Tube applications - For extension tubes, use HREW .120 wall tube, it telescopes nice
-HREW 1 3/4"x.120 wall - Generally a 4 foot extension is all that's necessary
-DOM 1 3/4"x.120 wall - More like 8 feet of leverage is good, because of the extra spring back
-DOM 2"x.188 wall - 8 feet and our 300# neighbor got about 5° of rotation pretty easy.
DIY guys on a budget, this is something you can easily make too. If you only bend HREW a narrow strap with 2 bolts will work, for DOM you will want 4 bolts and a wider base. The flat strap on the ground is 1/8" thick and completes the triangle.
1/18/26 product launch
