This is the best all around ramp. 2' long ramp x 4' wide gives a nice transition and is wide enough to actually hit at speed. It folds down to 5" tall and is easy to transport to new spots. With the frame only option, you'll need to supply your own top deck which is available at any local lumber store, check out the link below. Aluminum frame is easy to assemble, start feet
hold ramp solid at any angle, leg feet keep it planted. Ramp deck is
1/8" textured tempered hardboard, 1/5 scale ramp has two layers for more
impact resistance. Ramp deck has good weather resistance, painting it
will help if you want to leave it out permanently in wet climates.
Assembly - Takes 30-40 min. - Frame bolts together with expanding tube inserts, then clamp deck and use pilot holes in frame to drill and screw the top deck to frame.
Options--
-Frame Only - Get the frame only and go to your local lumber store to pickup a sheet of 1/8" tempered hardboard. Home Depot has pre-cut 2'x4' sheets at $6.50 and they are the same textured hardboard that's included with our kits. Or a full 4'x8' sheet is only $13 and they will cut it to size for free.
Click here - Home Depot 1/8" hardboard 2'x4'-1/10 & 1/5 Scale - Comes with ramp deck (shipped separately), one layer for 1/10 scale two for 1/5 scale.
-Three Settings - 40° is a good long kicker (20-40'), 50° angle
high jump launches well over 10' high, 60° angle is great for low to
med. speed back flips.
-Aluminum frame is easy to assemble with expanding tube inserts
-Adjustable legs with 3D printed feet to keep ramp planted
-Start feet at base of ramp flip around to hold the start of ramp solid at higher angles
-Hardboard deck is textured and weather resistant, give it a coat of paint for wet climates
