20" x 48" Flat Ramp - DIY Frame ONLY - 20°- 40° Up to 1:8 Scale RC Jump

Write a Review

Your Price: $90.00

Part Number: RC-20x48

Availability: In Stock. FREE Shipping

- Two ramps in one, use with start for normal jumps, or without for easy front flips

- Available as just a frame ONLY, requires a 2'x4' sheet of 1/2" plywood

- Adjustable legs- 20° low jump, 30° more air & good distance, 40° kicker, 30° w/o start for front flips

- Read description below for more information

Quantity

Description
Videos
Instructions

This flat ramp design uses two pieces of plywood which simulates a transition and jumps very good, since it's a low angle. The bonus is to remove the start transition, set it to the 30° position and now it becomes a great front flip ramp! Having the hard 30° transition makes the car want to buck, so with a medium speed hit you can get a good front flip by just lifting off the throttle or a light brake tap.

Assembly - Takes 30-45 min. - Frame bolts together with expanding tube inserts, then clamp deck and use pilot holes in frame to drill and screw the top deck to frame.

Ramp Deck - 1/2" plywood is good up to 1:8 scale. You can use OSB or thinner plywood for smaller cars. Uses a 24" x 48" sheet that gets cut into 10" & 14" widths.

Plywood link - Click here - Home Depot 1/2" plywood 2'x4' Home Depot has pre-cut 2'x4' sheets at $25 and they will cut it to size for free.

- Specs -

- Folds down to 3" high x 20" wide, or 2" high x 14" wide if you remove the start board

- Weighs 12# with 1/2" plywood

- Four Settings - 20° is a nice low jump, 30° angle gets a more air and good distance, 40° angle is a good kicker, 30° with NO start is great for front flips

- 3/4"x .065 wall 6061 aluminum (also made in USA) frame is easy to assemble with expanding tube inserts

- Adjustable legs with 3D printed feet to keep ramp planted

6/24/25 listed

PT-60 Drag Shield Conversion - Plasma Torch Consumables

$90.00

In Stock. FREE Shipping

Select Options

Big Wheel Conversion - 2 ton Daytona

$125.00

In Stock. FREE Shipping

Select Options

Off-road Jack Conversion - 2 ton Daytona - Combo Kit

$245.00

In Stock. FREE Shipping

Select Options

Custom Length - Plasma Table - DIY Kit

$165.00

In Stock. FREE Shipping

Select Options

Ruler - Stainless Steel

$5.00

In Stock. FREE Shipping

Select Options

Offroad Jack Conversion - 1.5 ton Big Red/Torin - Combo Kit

$245.00

In Stock. FREE Shipping

Select Options

20" x 48" Flat Ramp - DIY Frame ONLY - 20°- 40° Up to 1:8 Scale RC Jump

Related Items