With our new 1:5 scale ramp also comes a new 1:8 scale version. This takes the same design as the 1:5 scale, but uses mostly 3/4"x .065 tube to save on cost. This new design stays planted better than our previous 2x4 ramp, which is now being labeled for 1:10 scale. This new design has a separate start transition that allows the main
ramp frame to stay planted on the ground, we then added a cross bar on
the legs, having this new setup keeps the ramp held in place much
better. The start transition is 1/8" Lexan with a 3/4" HDPE cross bar
that all comes pre-drilled and countersunk. This new design is flexible, but
also uses the cross bar to stay in contact with the ground, this combo
allows for a perfect solution for a long lasting ramp.
This is the best all around ramp. 2' long ramp x 4' wide gives a nice transition and is wide enough to actually hit at speed. It folds down to 5" tall and is easy to transport to new spots.
Assembly required - Takes about 1 hour - Frame bolts together with expanding tube inserts, then clamp deck and use pilot holes in frame to drill and screw the top deck to frame.
Ramp Deck - 2 sheets of 1/8" Masonite (hardboard) are cheap and work good, or get 1 sheet of 1/8" Lexan (polycarbonate) for a longer lasting deck. Lexan will need to be countersunk for flat head screws to sit flush.
Masonite link -
Click here - Home Depot 1/8" hardboard 2'x4' Home Depot has pre-cut 2'x4' sheets at $7 and they textured hardboard that's included with our kits. Or a full 4'x8' sheet is only $13 and they will cut it to size for free, which gives you extras.
- Specs -
- 31" long ramp when setup, folds to 24" for transport
- Folds down to 5" high or 3" if you remove legs
- Weighs 20 lbs. with 2 layers of Masonite
- Three Settings - 40° is a good long kicker (20-40'), 50° angle
high jump launches well over 15' high, 60° angle is great for low to
med. speed back flips.
- 3/4 & 1" x .065 wall 6061 aluminum (also made in USA) frame is easy to assemble with expanding tube inserts
- Masonite deck is weather resistant, give it a coat of paint for wet climates. Use smooth side for mostly high speed, or textured side for lower speed stunts.
4/2/25 - Product listed
